| General Product Specifications (Solid State Lasers Phalanx 473nm) |
| Wavelength (nm) |
635±5 |
| Output power (mW) |
100~500 |
| Transverse mode | Near TEM00 |
| Operating mode | CW |
| Power stability (rms, over 4 hours) |
1%,<3%,<5% |
| Warm-up time (minutes) |
<5 |
| M2 factor |
<20 |
| Beam divergence, full angle (mrad) |
<3.0 |
| Beam diameter at the aperture (mm) |
~5×8 |
| Beam height from base plate(mm) |
24.8 |
| Spectral linewidth (nm) |
<1.5 |
| Polarization ratio |
>50:1 |
| Noise of amplitude (rms) | ~30% |
| Pointing stability after warm-up (mrad) | <0. 05 |
| Operating temperature (℃) | 10~35 |
| Expected lifetime (hours) | 10000 |
| Net weight of laser head (kg) |
0. 44 |
| Dimensions of laser head (mm) |
130(L)×36(W) ×40(H) |
| Power supply | 80~260VAC |
| Power supply Dimensions |
106(L) ×47(W) ×38(H) |
| Integrated driver |
PN156 |
| Power supply Net weight |
0.235kg |
| Warranty period | 1 year |
| TTL modulation | Optional, 2kHz or higher (others on request, up to 30kHz) |
| Analog modulation | Optional, 2kHz or higher(others on request, up to 30kHz) (0~max output / 0~5V input)
Remarks MRL-635 is a diode laser module, so the beam quality is not as good as the solid-state laser at 671nm.
The beam spot is nearly square. |
|
